Consequences of insufficient component-to-board edge spacing; Devices that are too close to the edge may interfere with the operation of automated assembly equipment, such as wave or reflow soldering machines. Devices that are too close to the edge may be damaged during the panelling of the board at the end of the manufacturing process. This […]
Severity of Inadequate Component to PCB Board Edge Spacing Read More »
Why do PCBs need to be stencilled? PCBs are assembled to meet production requirements. Some PCB boards are too small to meet the fixture requirements, so they need to be assembled together for production. In order to improve the soldering efficiency of SMT. Only need to pass through the SMT once to complete the soldering
What is hole-in-pad? Hole in the disk refers to the hole in the pad, the pad for the SMD disk, usually refers to 0603 and above SMD and BGA pads, usually referred to as VIP (via in pad). Plug-in holes in the pad can not be called a hole in the disk, because plug-in holes
Never Underestimate PCB Half-Hole Boards What is a PCB half-hole? Half vias are rows of holes drilled along the boundaries of a PCB for production purposes. When the holes are plated with copper, the edges are trimmed off so that the holes along the border are halved. The edges of the PCB look like a plated
Preface: In the complex PCB design and manufacturing process DFM manufacturing analysis is particularly important. DFM Design for Manufacturing, Design for manufacturability (DFM) DFM role is to improve the manufacturing process of the product. Today’s DFM is the core technology of parallel engineering, because design and manufacturing are the two most important links in the product life
Leading New Thinking in Industry – How the Meaning of DFM Will Evolve Read More »
What is the BOM? A simple understanding is: the list of electronic components, a product consists of many parts, including: circuit boards, capacitors, resistors, diodes, crystals, inductors, driver chips, microcontrollers, power supply chips, step-up and step-down chips, LDO chips, memory chips, connectors, connectors, pins, rows of mother, and so on. Engineers will be based on
How to Solve the Problem of Mismatch Between Bom Material and Pad Read More »
How to Ensure the Reliability Design of Electronic Products? What is Design for Manufacturability? Design for manufacture urability , Right now from from set up count open beginning Test consider product of Can system make sex , improve product pass rate and reliability , Makes the product easier to manufacture while reducing manufacturing costs. Design for
How to Ensure the Reliability Design of Electronic Products? Read More »
How to Avoid Pits for Small-Sized Holes and Slots in Device Pins? PCB board for plug-in device pins need to be drilled to insert the device, PCB drilling is a process of PCB plate making, is also a very important step. Mainly for the board holes, alignment needs to play a hole, the structure needs
How to Avoid Pits for Small-Sized Holes and Slots in Device Pins? Read More »
How to Avoid Pitfalls in Purchasing Electronic Components Recently I have seen many stories about purchasing electronic components on the Internet , the discussion is about the process of purchasing electronic components There have been a series of accident cases. Among them, there are problems with counterfeit goods, lack of professional knowledge, insufficient work experience, Wrong model purchased,
How to Avoid Pitfalls in Purchasing Electronic Components Read More »
